Collated Framing Nails Round Head 3-1/2 In Smooth Shank Plastic Fastener 500 Pc

Description

Collated Framing Nails Round Head 3-1/2 In Smooth Shank Plastic Fastener 500 Pc
From the manufacturer
Hot dip galvanized fasteners are coated with a layer of Zinc to help protect the steel from corroding. Although hot dip galvanized fasteners will corrode over time as the coating wears, they are generally good for the lifetime of the application. Hot dip galvanized fasteners are generally used for outdoor applications where the fastener is exposed to daily weather conditions such as rain and snow. Areas near the coasts where the salt content in rain water is much higher, should consider Stainless Steel fasteners as salt accelerates the deterioration of the galvanization and will accelerate corrosion.
Electro Galvanized fasteners have a very thin layer of Zinc that offers some corrosion protection. They are generally used in areas where minimal corrosion protection is needed such as bathrooms, kitchens and other areas that are susceptible to some water or humidity. Roofing nails are electro galvanized because they are generally replaced before the fastener begins to wear and are not exposed to harsh weather conditions if installed properly. Areas near the coasts where salt content in rain water is higher should consider a Hot Dip Galvanized or Stainless Steel fastener.
Stainless steel fasteners offer the best corrosion protection available. The steel may oxidize or rust over time but it will never lose its strength from corrosion. Stainless Steel fasteners can be used for exterior or interior applications and generally come in 304 or 316 stainless steel.
Smooth shank nails are the most common and are often used for framing and general construction applications. They offer enough holding power for most everyday use.
Ring shank nails offer superior holding power over smooth shank nails because the wood fills in the crevasse of the rings and also provide friction to help prevent the nail from backing out over time. A ring shank nail is often used in softer types of wood where splitting is not an issue.
A screw shank nail is generally used in hard woods to prevent the wood from splitting while the fastener is being driven. The fastener spins while being driven (like a screw) which creates a tight groove that makes the fastener less likely to back out.
Annular thread is very similar to a ring shank except the rings are externally beveled which presses against the wood or sheet rock to prevent the fastener from backing out.
Paper tape is generally used for 30 through 34 degree framing nails and has a strip of paper with glue holding the fasteners together. Paper tape nails contribute to a cleaner job site because the paper around the fastener is driven into the wood along with the fastener, instead of around the job site. Paper tape also reduces the risk of having material stuck under the nail head leaving the top part of the fastener exposed. However, they are sometimes easy to break apart and do not work well in wet or moist conditions because the paper can become soggy.
Plastic strip is generally used for 20 through 22 degree framing nails and 15 degree coil nails. They are held together by a strip of plastic that breaks apart when fired. They are often cheaper than other types of collated fasteners because they are easier to manufacture. However, they also leave a mess of plastic around the job site and can become very brittle when cold. They can also leave pieces of plastic under the head causing the nail to be exposed.
Plastic band is generally used for 15 degree coil nails. Plastic band is a higher priced alternative to plastic strip but it eliminates the messy job site and also pieces of plastic stuck under the nail head when the nail is driven. The plastic band exit's the coil nailer in one piece making for easy cleanup.
Wire weld is generally used for 28 degree framing nails and 15 degree coil nails. Wire welded fasteners use a thin piece of wire run lengthwise to hold the fasteners in position. They are not as susceptible to water or cold weather like paper or plastic collated nails, however, the can shoot sharp pieces of metal around the job site and are susceptible to having pieces of wire stuck under the head exposing the nail.
Full round head
Available in a 500 count
For use in 20 to 22 degree plastic collation framing nailers
Plastic collated smooth shank
Bright finish for interior use in non-treated lumber only
Full round head
______________________________________________________________________________________________________
OUR COMMITMENT
We are committed to ensuring your shopping experience with us goes above and beyond. Each order will arrive brand new in its original factory sealed packaging. We use a variety of authorized distributors and fulfillment centers all over the country, which means your order should arrive promptly, regardless of where you live. If for any reason you are not satisfied with your order, please don't hesitate to contact us (through "Ask seller a question" link), we will respond within 1 business day or less - we will make it right.
______________________________________________________________________________________________________
SHIPPING:
Shipping is
FREE
to all addresses other than APO/PO boxes in the lower 48 states. Unfortunately, we do not deliver to Alaska, Hawaii, Puerto Rico or any other U.S. Territory.
A Special Shipping fee for some items might be apply for the states of
CA, CT, LA, MD, MS, TN, FL and MA
. Most of our domestic orders ship within 2-3 business days of your payment being processed. Once an order has shipped it generally takes 3-5 business days for arrival. Our stock all ships from our US-based warehouses. Shipped via USPS, UPS FedEx and local carriers (depending on location and package weight).
______________________________________________________________________________________________________
RETURN POLICY
We offer a 30 day Return Policy from the delivery date. Return shipping is the responsibility of the buyer unless the return is a result of our mistake. We will pay for shipping replacement back to you if an exchange is requested. Please keep in mind that all returns must be
unused, unwashed and undamaged and all packaging, labels and tags must remain intact and be attached with the item.
Please include a detailed description of the problem with the item/order. We are unable to accept returns after 30 days of delivery date, for used items, or items where sanitary issues prohibit a return. When sending in a return, please note that it can take up to 5 business days for the return to be processed. We do our best to process as quickly as possible. Should the reason for the return be due to an issue on our part, we will make it right - at no cost to you.
______________________________________________________________________________________________________
ELECTRONIC PRODUCTS
Our electronics products are manufactured according to the specification of the US Electrical Standards and Codes. If you purchase these products to use in a country outside of the United States we cannot guarantee they will work properly. We assume no responsibility if the products malfunction or cause an accident because one try to use it with foreign electrical standards. The Use of a converter or other Voltage transforming.
______________________________________________________________________________________________________
FEEDBACK
Your feedback is very important to us. If you feel that any part of your experience with us does not merit a positive review, please let us know right away.
THANK YOU FOR SHOPPING WITH US!